What does forestry mulching cost?
The honest answer is "it depends on the block". But here's what actually drives the price, and the ballpark ranges to expect before you get a real quote.
There's no single sticker price for forestry mulching because no two blocks are the same. A hectare of light regrowth and a hectare of thick, ropey lantana on a slope are completely different jobs, even though they're the same size on a map. What you're really paying for is machine time, and how fast the machine gets through your country decides the bill.
Jobs are usually priced one of two ways: by the day, or as a fixed price for the project once someone's seen it. A day rate suits ongoing or straightforward work; a fixed project price is better when you want to know the number before anything starts.
Ballpark ranges
Treat these as a starting point, not a quote. They're broad on purpose. The whole point of this guide is that density and access move the number a lot.
| How it's priced | Typical range | Best for |
|---|---|---|
| Day rate | $2,200 to $2,600 / day | Ongoing or straightforward clearing |
| Project (light) | $700 to $1,000 / acre | Grass, light regrowth, thin scrub |
| Project (medium) | $1,200 to $1,900 / acre | Solid scrub, woody weed, saplings |
| Project (heavy) | $2,000 to $3,500 / acre | Dense lantana, bigger timber, steep ground |
| Float / transport | $400 to $800 | Getting the machine to and from site |
Anyone quoting a firm per-acre price off a map is guessing. Send us photos and the details and we'll email you a fixed quote, so the number you get is the number you pay, with no open-ended bills when the scrub turns out thicker than it looked from the gate.
What moves the price
Density
This is the big one. The thicker and woodier the growth, the slower the machine goes and the more passes it takes. Light regrowth can be several times faster per acre than dense, established lantana, so it can cost several times less.
Stem size
Grinding a wrist-thick sapling is quick. Grinding something the size of your leg takes real time, and anything past the head's rated size isn't a mulching job at all.
Terrain and access
Slopes, rocks, gullies and creek crossings all slow the work and can need a bigger or more careful machine. And if the float can't get near the work, that adds time before a tooth even touches scrub.
Size and travel
Bigger jobs are usually cheaper per acre, because the machine's already there and warmed up. A small job a long way out carries more travel cost per acre than a big job next door.
How to get a sharper number
- Know your rough area. Even "about 5 acres of it" helps.
- Describe the growth. Grass and saplings, or head-high lantana you can't walk through?
- Flag the tricky bits. Slopes, rock, wet ground, trees you want kept.
- Send photos. A couple of pics from the gate tells us more than a paragraph. Attach them to the quote form, or ask us to email you an upload link.
Is it worth it?
Against the alternative (slashing what you can, then hand-clearing or burning the rest over weeks of weekends), mulching usually works out cheaper once you count your own time, gear and the mess. It's one machine, one visit, and the block's usable the same day. We break the methods down in mulching vs slashing & dozing.
Want a real number for your block?
Send the basics and a photo or two, and we'll email you a fixed quote.